Question Overview: This question is designed to see how candidates handle problems. They should be able to describe how they identified the problem and how they came up with a solution. They should also be able to explain how they communicated the solution to others.
Sample Answer: At National Auto Parts, we had a problem with our assembly line when the bolts were stripped out. I worked with my team to come up with a solution that prevented this from happening again.
Question Overview: Manufacturing engineers are responsible for keeping customers happy and maintaining a positive work environment. They'll have to deal with customers who are unhappy about a product or workers who are upset about a quality issue. Candidates should demonstrate how they handle these situations professionally and with empathy.
Sample Answer: I had a customer who was upset that his car's engine was damaged by our product. I apologized and offered to pay for the repairs. I also made sure we investigated the problem to prevent it from happening again.
Question Overview: This is a classic interview question that gives you insight into the applicant's self-awareness. They should be able to describe their strengths and weaknesses in a way that demonstrates they're aware of their own skills and areas for improvement. You'll also get an idea of how they view themselves and how they want to be viewed by others.
Sample Answer: My strengths are my ability to work with people and my attention to detail. I'm always looking for ways to improve my communication skills.
Question Overview: This is a common question that's asked in almost every interview. Candidates should be prepared to answer it, and they should be honest. A manufacturing engineer should be able to explain how they've improved on their weakness in the past.
Sample Answer: I'm not the best at delegating tasks to others. I've learned to trust my team and let them do their jobs.
Question Overview: Manufacturing engineers must understand the difference between precision and accuracy. Precision refers to how close a measurement is to another measurement, while accuracy refers to how close a measurement is to the actual value. Candidates should be able to explain the difference and give an example of each.
Sample Answer: Precision is how close a measurement is to another measurement. Accuracy is how close a measurement is to the actual value. For example, if I measure the length of a table at 10 feet, then measure it again and get 10 feet, I have high precision but low accuracy. If I measure the length of a table at 10 feet and get 10 feet, I have high accuracy but low precision.
Question Overview: Manufacturing engineers come from a wide range of backgrounds, from education to previous work experience. This question will give you an idea of their technical skills, as well as their ability to communicate with others.
Sample Answer: I have a bachelor's degree in mechanical engineering and I've worked in the automotive industry for the past three years.
Question Overview: Manufacturing engineers are responsible for managing the production process and the people who work on it. They're often in charge of training new workers and overseeing their performance. Candidates should demonstrate a willingness to work with others and a desire to improve processes.
Sample Answer: I like to be managed by someone who gives me clear goals and then lets me do my job. I don't like micromanagement.
Question Overview: Manufacturing engineers work in teams with other engineers, technicians and production workers. They should be able to communicate with all of these people effectively. Candidates should demonstrate a willingness to help others and a desire to see the project succeed.
Sample Answer: I would first make sure my coworker understood the importance of their role in the project. If they still weren't able to meet their deadlines, I would ask them to explain why and find ways to help them improve.
Question Overview: Manufacturing engineers are responsible for designing and overseeing the manufacturing of products. They should be able to explain the difference between two valves that are commonly used in industrial settings. This question will help you gauge their knowledge of industrial components and how well they communicate technical details.
Sample Answer: A ball valve is a type of gate valve that uses a ball to control the flow of liquid or gas. Butterfly valves are also gate valves but use a disc instead of a ball.
Question Overview: Manufacturing engineers must be well-rounded in technical skills and have a broad understanding of the industry. This question will help you determine how well the applicant's education and experience matches the job.
Sample Answer: I'm better at both mechanical and electrical engineering.
Question Overview: This is a chance for the applicant to sell themselves to you. They should demonstrate their ability to communicate clearly and concisely, as well as their interest in the job.
Sample Answer: I'm a quick learner with a strong work ethic. I've been working with manufacturing processes for over ten years, and I'm looking for a new challenge.
Question Overview: This is a common question that's asked at the end of the interview. It's a good idea to have a few candidates in mind before you start interviewing. You'll also want to make sure you have a job opening available.
Sample Answer: I'm available to start immediately.
Question Overview: This is a simple question that will give you a sense of the candidate's work history. It's important to know how long they've been in the industry and what their career path has been like.
Sample Answer: I've been in the manufacturing industry for five years. I started as an entry-level technician and worked my way up to a manufacturing engineer position.
Question Overview: This question is a simple way to get to know the applicant better. You'll learn about their interests, hobbies and personality. The applicant should be able to describe their personal and professional goals. They should also be able to describe how they've achieved their goals in the past.
Sample Answer: I'm a big fan of football. I've been playing since high school and I'm a season ticket holder for the Bears. I've also been working towards my MBA at night school.
Question Overview: Manufacturing engineers are responsible for implementing the company's manufacturing process. They must work with other departments and managers to ensure that their designs are implemented correctly. Candidates should be able to describe how they collaborate with other departments and how they address issues when they arise.
Sample Answer: I once had a disagreement with my manager over the best way to implement a new process. I presented my case and we came to a compromise that satisfied both of us.
Question Overview: Candidates will have different reasons for applying for a job. Some may be looking for a career change, while others may be looking for a new challenge. You'll want to know what the applicant's motivations are so you can determine if they're a good fit for the role.
Sample Answer: I'm interested in working in a manufacturing environment because I want to learn more about the industry. I've always been interested in how things are made and I've heard great things about your company.
Question Overview: Manufacturing engineers are often in charge of supervising workers and leading teams. They should be able to demonstrate leadership qualities that include being a role model, setting goals and encouraging others to meet them. Candidates should also be able to describe how they've handled difficult situations with workers or other managers.
Sample Answer: I've been in charge of teams that have had to meet tight deadlines. I've always set clear goals and encouraged my team to reach them.
Question Overview: Manufacturing engineers are often tasked with working with other engineers, technicians and supervisors. They must be able to communicate their ideas and opinions in a professional manner. Candidates should demonstrate how they've handled disagreements in the past and how they've resolved them.
Sample Answer: I had a disagreement with a supervisor over the best way to handle a production problem. We were both right, but we needed to find a solution that worked for both of us.
Question Overview: Manufacturing engineers are responsible for the assembly of products. This question will give you an idea of how well they understand the process and how well they communicate technical details.
Sample Answer: I would first make sure the tire was properly inflated and the wheel was clean. I'd then use a torque wrench to tighten the lug nuts to the specified torque.
Question Overview: This is a question to see how well the candidate knows the company. It's also a chance to see if they've researched the company and understand what they're getting into.
Sample Answer: I chose Mauser because of its reputation for high-quality products and its commitment to innovation.